Non Contact Safety Switches (591 artikelen)

EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. CE, cULus, TUV. Actuator. The normally closed (NC) circuits are closed when the guard is closed and the actuator is pres...

OverviewThe IN4000 Standard inductive safety switches are used for determining position and work on a non-contact basis. These safety switches are actuated through metal (e.g., ST37 steel) so that ...

EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. CE, cULus, TUV. Actuator. The normally closed (NC) circuits are closed when the guard is closed and the actuator is pres...

IN4000 Inductive Safety Switch. The IN4000 inductive safety switch is used for position monitoring and has an inductive sensor that is activated by metal (e.g. steel ST37), therefore it does not re...

Housing Material = Stainless Steel Connection Type = Cable Switch Type = Magnetic Reed Contact Actuator Type = Magnetic Sensor Principle = Magnetic Series = BNS 40 IP Rating = IP67 Width = 15mm

EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. CE, cULus, TUV. Actuator. The normally closed (NC) circuits are closed when the guard is closed and the actuator is pres...

″Transponder technology for presence detection Pilz coding type: Coded Dual-channel operation 2 safety outputs LED display for: – State of the actuator – Supply voltage/fault 4 directions of actuat...

Schmersal Safety SensorThe Schmersal RSSS260 series non-contact safety switch(with latching) with RFID technology is active in the lateral area with a switching distance of 12mm. It is an electroni...

Supply Voltage = 24V dc Safety Contacts = NO/2NC Housing Material = Glass Fibre Reinforced Thermoplastic Connection Type = 10m Cable Installation Type = Flush Actuator Type = Magnetic Sensor Princi...

Telemecanique Sensors Magnetic Safety SwitchThe Telemecanique Sensors XCS-DMC series magnetic safety switch has 5mm tolerance to misalignment. This means that it can protect the operator by immedia...

IN4000 Inductive Safety Switch. The IN4000 inductive safety switch is used for position monitoring and has an inductive sensor that is activated by metal (e.g. steel ST37), therefore it does not re...

EN1088 (ISO 14119), EN 60947-5-1, EN 60204-1, ISO 13849-1, EN 62061, UL 508. CE, cULus, TUV. Actuator. The normally closed (NC) circuits are closed when the guard is closed and the actuator is pres...

Supply Voltage = 24V dc Safety Contacts = NO/NC Housing Material = Glass Fibre Reinforced Thermoplastic Connection Type = 5m Cable Installation Type = Flush Actuator Type = Magnetic Sensor Principl...

″Transponder technology for presence detection Pilz coding type: Coded Dual-channel operation 2 safety outputs LED display for: – State of the actuator – Supply voltage/fault 4 directions of actuat...

IN4000 Inductive Safety Switch. The IN4000 inductive safety switch is used for position monitoring and has an inductive sensor that is activated by metal (e.g. steel ST37), therefore it does not re...