Crimp Contacts (811 artikelen)

Gender = Female For Use With = Automotive Connector Series = 7258 Minimum Wire Size mm² = 0.14 Termination Method = Crimp Maximum Wire Size AWG = 26AWG

The Molex Mega-Fit Terminal contact provides six independent contact points in a split box design. The design of the Mega-Fit Terminal also allows ″hot plugging″ for up to 30 cycles at 48V/23A by v...

Gender = Female Series = 76823 Termination Method = Crimp or Compression Maximum Wire Size AWG = 12AWG

Gender = Female Series = 76823 Termination Method = Crimp or Compression Contact Plating = TinAWG Maximum Wire Size AWG = 14AWG Series Number = 76823 Maximum Contact Resistance = 2mΩ Maximum Curren...

Gender = Female For Use With = 151192, Milli-Grid Receptacle Housings 51110 Series = 87396 Termination Method = Crimp or Compression

Gender = Female For Use With = 151192, Milli-Grid Receptacle Housings 51110 Series = 87396 Termination Method = Crimp or Compression

The Molex Crimp Terminal comes with pre plated tin and 26 to 30 AWG wire size. This terminal has 0.70 to 1.00mm wire insulation diameter.Reel packaging type Phosphor bronze metal material

Gender = Female For Use With = Automotive Connector Series = 87421 Minimum Wire Size mm² = 0.05 Termination Method = Crimp Maximum Wire Size AWG = 30AWG

Molex EXTreme Ten60Power TPA (Terminal Position Assurance). EXTreme Ten60Power TPA (Terminal Position Assurance) for use with the 172510 series and 172512 crimp receptacle housings. This TPA retain...

4mm Board-In Crimp Terminal - Series 50098. 4mm board-in crimp terminal with housing lance for retention to housing and terminal protection. These board-in crimp terminals have a PCB guide ridge th...

Board-In Crimp Stand Alone Terminals, Series 5298. These terminals are used as a mechanical holding device to retain a wire in a printed circuit,board until the board is wave soldered. This termina...

4mm Board-In Crimp Terminal - Series 50098. 4mm board-in crimp terminal with housing lance for retention to housing and terminal protection. These board-in crimp terminals have a PCB guide ridge th...

Board-In Terminal, 50097 Series. The 50097 Series is a Spring-fit style Terminal giving high pressure contact to PCB with Guide Ridge to aid board position.

Board-In Terminal, 50097 Series. The 50097 Series is a Spring-fit style Terminal giving high pressure contact to PCB with Guide Ridge to aid board position.

2.0mm Board-In Crimp Right Angle Terminals, 35021 Series. A range of 35021 Series 2.0 mm Board-In Crimp Right Angle Terminals for use in 2.0 mm pitch or 2.5 mm pitch Board-In Housings, see stock nu...