development  (12.153 artikelen gevonden)

The SEGGER J-Link Microchip 2-Wire JTAG TDI Adapter allows debug connections between J-Link and target hardware which comes with Microchip IS208x series MCUs. It supports the Microchip 6-pin single...

Product Name = ReSpeaker Dual Microphone HAT for Raspberry Pi Accessory Category = Audio Form Factor = HAT

Sensor Technology = Humidity, Temperature Featured Device = SHT45-AD1B-R2 For Use With = SHT45-AD1B Kit Classification = Development Kit Kit Name = Sensor Development Kit

Classification = Development Board Kit Name = ESP32-DEV-16P Technology = Bluetooth, Wi-Fi Device Core = ESP32 Processor Family Name = ESP32

Reduced form factor ARM/Cortex Debug Probe, Microchip PIC32 Debug Probe, Renesas RX Debug Probe, and SiLabs EFM8 / C8051 Debug Probe. Includes a USB cable, and a 20-pin, 0.1″ ribbon cable. Addition...

The ReSpeaker Mic Array v2.0 is a hardware-based solution for creating or adding voice-interface to your projects. The board is a far-field microphone array device capable of detecting voices up to...

Sensor Technology = Particulate Matter Sensor Featured Device = SPS30 Kit Classification = Evaluation Kit Kit Name = SPS30 Sensor & USB adapter cable

Classification = Development Board Kit Name = ESP32-DEV-BD38 Technology = Bluetooth, Wi-Fi Device Core = ESP32 Processor Family Name = ESP32

The emPower eval board provides a comprehensive set of SEGGER’s middleware products, accelerating the start of any embedded project. SEGGER’s embOS real-time operating system is at the heart of the...

The Seeed Studio SoM - STM32MP157C is a System-On-Module for ODYSSEY-STM32MP157C, based on STM32MP157C, a dual-core Arm Cortex-A7 processor, operating at 650Mhz. The processor also integrates an Ar...

Sensor Technology = Gas Sensor Kit Classification = Evaluation Kit Kit Name = PID Sensor Development Kit for 10.6eV

Classification = Relay Module Kit Classification = Module For Use With = Arduino, Raspberry Pi Featured Device = Relay Control Card Kit Name = ESP32-RELAY04

J-Link ARM JTAG Isolator Board. The J-Link JTAG Isolator can be connected between a J-Link Probe and an ARM-board with a 20-pin JTAG-ARM connector to provide electrical isolation. This is essential...

The Seeed Studio Seeeduino XIAO - Arduino Microcontroller is the smallest Arduino compatible board in Seeeduino Family. It is an Arduino microcontroller that is embedded with the SAMD21 microchip. ...

OverviewAt a glanceCompact 36 mm absolute encoder with up to 3723 steps (for singleturn and multiturn) Servo flange Radial cable outlet Analog interface 4 to 20 mA or 0 to 10 V Programming via keyp...