TE Connectivity AD Hand Ratcheting Crimp Tool for DuraSeal Splices, 0.3 → 5mm² Wire

TE Connectivity AD-1522-1 Hand Crimping Tool for DuraSeal Splices. The Importance of a High-Quality Crimp. When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage. TE Connectivity DuraSeal Handing Crimping Tool - Overview. From TE Connectivity, an easy to use hand operated crimping tool made from high-quality materials for crimping DuraSeal crimp splices onto wire. The crimping tool consists of handles and two crimping jaws. The crimping jaws contain three crimping chambers with clearly marked wire sizes. The crimping tool is supplied with a pre-set crimp depth to ensure that the correct combination of tensile strength and insulation integrity is achieved when crimping. A ratchet controlled release mechanism ensures that the handles of the crimp tool do not release until a full crimp cycle is achieved. Key Features and Benefits. Easy to use with a smooth operation Pre-set crimp depth ensures crimp integrity Ratchet controlled release mechanism ensures full crimp cycle Crimping cavities are polished for maximum crimping reliability Ergonomic design for operator comfort. Questions and Answers. What terminals can this tool be used with? This hand crimping tool is used for crimping DuraSeal splices with a wire size range from 22 to 10 AWG What Kind of Crimp Does this Tool Produce? This tool produces an open barrel style crimp