HPE Midline Helium - Vaste schijf - 12 TB - hot-swap (verwisselbaar zonder uitschakelen) - 3.5" LFF - SATA 6Gb/s - 7200 tpm - met HPE Smart Carrier

Algemeen

Type apparaat

Vaste schijf - hot-swap (verwisselbaar zonder uitschakelen)

Capaciteit

12 TB

Model

3.5" LFF

Interface

SATA 6Gb/s

Bytes per sector

512

Functies

Geavanceerde indeling 512e, Heliumtechnologie, Digitally Signed Firmware

Breedte

105.8 mm

Diepte

170 mm

Hoogte

26.8 mm

Gecombineerd met

HPE Smart Carrier

Garantie van de fabrikant

Service & Support

Beperkte garantie - 1 jaar

Prestaties

Overdrachtsnelheid van station

600 MBps (extern)

Zoektijd

8 ms (gemiddeld) / 16 ms (max.)

Zoektijd (spoor-naar-spoor)

0.23 ms

Spindelsnelheid

7200 tpm

Omgevingsparameters

Min. gebruikstemperatuur

10 °C

Max. gebruikstemperatuur

35 °C

Informatie over Compatibiliteit

Ontworpen voor

HPE Nimble Storage dHCI Large Solution with HPE ProLiant DL380 Gen10 (3.5"), Medium Solution with HPE ProLiant DL360 Gen10 (3.5"), Small Solution with HPE ProLiant DL360 Gen10 (3.5") ¦ HPE ProLiant DL20 Gen9 (3.5"), DL20 Gen9 Base (3.5"), DL20 Gen9 Entry (3.5"), DL20 Gen9 Performance (3.5"), DL20 Gen9 Solution (3.5"), DL20 Gen9 Special Server (3.5"), DL360 Gen10 (3.5"), DL360 Gen10 All Flash Server for Weka (3.5"), DL360 Gen10 Base (3.5"), DL360 Gen10 Compute Server for Cohesity DataPlatform (3.5"), DL360 Gen10 Entry (3.5"), DL360 Gen10 High Performance (3.5"), DL360 Gen10 Low (3.5"), DL360 Gen10 Network Choice (3.5"), DL360 Gen10 Performance (3.5"), DL360 Gen10 Performance for Cohesity DataPlatform (3.5"), DL360 Gen10 Server for CTERA (3.5"), DL360 Gen10 SMB (3.5"), DL360 Gen10 SMB Network Choice (3.5"), DL360 Gen10 Solution (3.5"), DL380 Gen10 (3.5"), DL380 Gen10 All Flash Server for Datera (3.5"), DL380 Gen10 Base (3.5"), DL380 Gen10 Entry (3.5"), DL380 Gen10 Entry SMB (3.5"), DL380 Gen10 for Cohesity DataPlatform (3.5"), DL380 Gen10 for SAP HANA Compute Block (3.5"), DL380 Gen10 High Performance (3.5"), DL380 Gen10 Hybrid Server for Datera (3.5"), DL380 Gen10 Network Choice (3.5"), DL380 Gen10 Network Choice for CTERA (3.5"), DL380 Gen10 Network Choice for SAP HANA Compute Block (3.5"), DL380 Gen10 Performance (3.5"), DL380 Gen10 Server for CTERA (3.5"), DL380 Gen10 SMB (3.5"), DL380 Gen10 SMB Networking Choice (3.5"), DL380 Gen10 Solution (3.5"), DL385 Gen10 (3.5"), DL385 Gen10 Base (3.5"), DL385 Gen10 Entry (3.5"), DL385 Gen10 High-Performance (3.5"), DL385 Gen10 Performance (3.5"), DL385 Gen10 SMB (3.5"), DL385 Gen10 Solution (3.5"), DL388 Gen10 (3.5"), DL60 Gen9 (3.5"), DL60 Gen9 Base (3.5"), DL60 Gen9 Entry (3.5"), DL80 Gen9 (3.5"), DL80 Gen9 Base (3.5"), DL80 Gen9 Entry (3.5"), ML30 Gen9 (3.5"), ML30 Gen9 Base (3.5"), ML30 Gen9 Entry (3.5"), ML30 Gen9 Performance (3.5"), ML30 Gen9 Solution (3.5")

Uitbreiding & verbinding

Interfaces

1 x SATA 6 Gb/s

Compatibele sleuf

3.5" LFF